Page 1
Safe Operation Practices • Set-Up • Operation • Maintenance • Service • Troubleshooting • Warranty ’ peratOr anual Model Series 760-770 Lawn Tractor WARNING READ AND FOLLOW ALL SAFETY RULES AND INSTRUCTIONS IN THIS MANUAL BEFORE ATTEMPTING TO OPERATE THIS MACHINE. FAILURE TO COMPLY WITH THESE INSTRUCTIONS MAY RESULT IN PERSONAL INJURY.
To The Owner Thank You Thank you for purchasing a lawn tractor manufactured by If you have any problems or questions concerning the machine, MTD LLC. It was carefully engineered to provide excellent phone your local authorized MTD service dealer or contact us performance when properly operated and maintained.
Important Safe Operation Practices WARNING! This symbol points out important safety instructions which, if not followed, could endanger the personal safety and/or property of yourself and others. Read and follow all instructions in this manual before attempting to operate this machine. Failure to comply with these instructions may result in personal injury.
Page 4
A missing or damaged discharge cover can cause blade Slope Operation contact or thrown object injuries. Slopes are a major factor related to loss of control and tip-over Stop the blade(s) when crossing gravel drives, walks, or accidents which can result in severe injury or death. All slopes roads and while not cutting grass.
Page 5
Children Service Tragic accidents can occur if the operator is not alert to the Safe Handling of Gasoline: presence of children. Children are often attracted to the machine and the mowing activity. They do not understand To avoid personal injury or property damage use extreme the dangers.
Periodically check to make sure the blades come to Do not modify engine complete stop within approximately (5) five seconds after To avoid serious injury or death, do not modify engine in any operating the blade disengagement control. If the blades way.
Page 7
Safety Symbols This page depicts and describes safety symbols that may appear on this product. Read, understand, and follow all instructions on the machine before attempting to assemble and operate. Symbol Description READ THE OPERATOR’S MANUAL(S) Read, understand, and follow all instructions in the manual(s) before attempting to assemble and operate DANGER—...
Assembly & Set-Up Assembly & Set-Up Tractor Set-Up NOTE: If the battery is put into service after the date shown on top/side of battery, charge the battery as instructed in the NOTE: This Operators Manual covers a range of product Maintenance section your Operator’s Manual prior to operating specifications for various models.
Page 10
Attaching The Steering Wheel Attaching The Seat If the steering wheel for your tractor did not come attached, the If the seat for your tractor was not attached at the factory, follow hardware for attaching it has been packed within the steering the applicable instructions below to attach it.
Page 11
Mulch Plug (if equipped) Service the engine with gasoline and oil as instructed in the separate Engine Operator/Owner Manual packed with your On tractor models so equipped, a mulch plug can be found tractor. Read the instructions carefully. within the cutting deck’s discharge opening. IMPORTANT: Your tractor is shipped with motor oil in the NOTE: Refer to Mulching in the “Operation”...
Controls and Features Speed Control & Parking Brake Lever Clutch/Brake Pedal Choke Knob Throttle/Choke Lever Ignition Switch (On some models) Module Shift Lever PTO (Blade Engage) Lever Deck Lift Lever Figure 4-1 Lawn Tractor controls and features are illustrated in Fig 4-1 and described on the following pages. WARNING! Read and follow all safety rules and instructions in this manual, including the entire Operation section, before attempting to operate this machine.
Throttle Control Lever On/Lights The throttle control lever is located on the right side of the Start tractor’s dash panel. This lever controls the speed of the engine and, on some models, when pushed all the way forward, the choke control also. When set in a given position, the throttle will maintain a uniform engine speed.
Page 14
To stop the engine, turn the ignition key counterclockwise to the OFF position. See Fig. 4-3B. Ignition Switch Module To start the engine, insert the key into the ignition switch and turn clockwise to the START position. Release the key into the NORMAL MOWING MODE position once the engine has fired.
Operation Operation Models with Reverse Caution Mode • With the ignition key in the NORMAL MOWING position, the engine will automatically shut off if the PTO (Blade Engage) lever is moved into the engaged (ON) position with the shift lever in Reverse. WARNING! Do not operate the tractor if the interlock system is malfunctioning.
Once activated (indicator light ON), the tractor can be Starting the Engine driven in reverse with the cutting blades (PTO) engaged. WARNING! Do not operate the tractor if the Always look down and behind before and while backing to interlock system is malfunctioning. This system was make sure no children are around.
Page 17
Driving The Tractor Place speed control lever in desired position. Place shift lever in either FORWARD or REVERSE, and follow WARNING! Avoid sudden starts, excessive speed normal operating procedures. and sudden stops. Driving On Slopes WARNING! Do not leave the seat of the tractor without first placing the PTO (Blade Engage) lever in Refer to the SLOPE GAUGE in the Important Safe Operation the disengaged (OFF) position, depressing the brake...
Page 18
NOTE: It is not necessary to remove the discharge chute to Mowing operate the mower with the mulch kit installed. WARNING! To help avoid blade contact or a WARNING! Never operate the mower without the thrown object injury, keep bystanders, helpers, discharge chute properly attached.
Maintenance & Adjustments Maintenance NOTE: Refer to the Engine Operator/Owner Manual packed with your unit for information regarding the quantity and proper WARNING! Before performing any maintenance or viscosity of motor oil. repairs, disengage PTO, move shift lever into neutral Air Cleaner position, set parking brake, stop engine and remove key to prevent unintended starting.
Page 20
Cleaning Battery Deck Wash System™ Clean the battery by removing it from the tractor and washing If your tractor’s deck is equipped with a water port on its surface with a baking soda and water solution. If necessary, scrape the as part of its Deck Wash System™, follow these instructions to battery terminals with a wire brush to remove deposits.
IMPORTANT: Side to Side After cleaning your deck with the Deck Wash System™ , return to the operator’s position and engage the PTO. If the cutting deck appears to be mowing unevenly, a side to side Keep the cutting deck running for a minimum of two minutes, adjustment can be performed.
Maintenance Schedule Before Every Every Every Every Prior Each use 10 Hours 25 Hours 50 Hours 100 Hours to Storing Clean Hood/Dash Louvers Check Engine Oil Level Check Air Filter for Dirty, Loose or Damaged Parts Clean and Re-oil Air Filter’s Foam Pre-cleaner Replace Air Filter Element Change Engine Oil and Replace Oil Filter Clean Battery Terminals...
Service Service Cutting Deck Removal NOTE: Models equipped with a 38-inch deck have one deck idler pulley. Models equipped with a 42- and 46-inch deck have two deck idler pulleys. To remove the cutting deck, proceed as follows: Place the PTO (Blade Engage) lever in the disengaged (OFF) position and engage the parking brake.
Page 24
Make the final connection on the engine block of the tractor, away from the battery. Attach to a unpainted part to assure a good connection. CAUTION: If the jumper battery is installed on a vehicle (i.e. car, truck), do NOT start the vehicle’s engine when jump starting your tractor.
Cutting Blades WARNING! Shut the engine off and remove ignition key before removing the cutting blade(s) for sharpening or replacement. Protect your hands by using heavy gloves when grasping the blade. WARNING! Periodically inspect the blade and/or spindle for cracks or damage, especially after you’ve struck a foreign object.
On the 42-inch deck only, loosen but do not remove, the idler Remove the deck belt from around all pulleys, including pulley nuts. This will enable the belt to be easily removed from the deck idler pulley. the idler pulleys. See Fig. 7-7 on the next page. Route the new belt as shown in and Fig.
Troubleshooting Problem Cause Remedy Engine fails to start PTO/Blade engaged. Place knob (or lever) in disengaged (OFF) position. Spark plug wire disconnected. Connect wire to spark plug. Fuel tank empty, or stale fuel. Fill tank with clean, fresh (less than 30 days old) gas.
Attachments & Accessories The following attachments and accessories are compatible for Model Series 700 Lawn Tractors. See the retailer from which you purchased your tractor, an authorized MTD Service Dealer or phone (800) 800-7310 for information regarding price and availability. CAUTION: Series 700 Lawn Tractors are NOT designed for use with any type of ground-engaging attachments (e.g.
CALIFORNIA EMISSION CONTROL WARRANTY STATEMENT YOUR WARRANTY RIGHTS AND OBLIGATIONS The California Air Resources Board and MTD Consumer Group Inc are pleased to explain the evaporative emission control system warranty on your 2007 lawn mower. In California, new lawn mowers must be designed, built and equipped to meet the State’s stringent anti-smog standards. MTD Consumer Group Inc must warrant the EECS on your lawn mower for the period of time listed below provided there has been no abuse, neglect or improper maintenance of your lawn mower.
MANUFACTURER’S LIMITED WARRANTY FOR The limited warranty set forth below is given by MTD LLC with c. Routine maintenance items such as lubricants, filters, blade respect to new merchandise purchased and used in the United States sharpening, tune-ups, brake adjustments, clutch adjustments, and/or its territories and possessions, and by MTD Products Limited deck adjustments, and normal deterioration of the exterior finish with respect to new merchandise purchased and used in Canada and/...
Medidas importantes de seguridad • Configuración • Funcionamiento • Mantenimiento • Servicio • Solución de problemas • Garantía anual del peradOr Serie Modela 760-770 Tractor de Césped ADVERTENCIA LEA Y SIGA TODAS LAS INSTRUCCIONES DE ESTE MANUAL ANTES DE PONER EN FUNCIONAMIENTO ESTA MÁQUINA. SI NO RESPETA ESTAS INSTRUCCIONES PUEDE PROVOCAR LESIONES PERSONALES.
Page 34
Al propietario Gracias Gracias por comprar un tractor corta césped fabricado por MTD previo aviso y sin generar responsabilidad por obligaciones de LLC. El mismo ha sido diseñado cuidadosamente para brindar ningún tipo. excelente rendimiento si se lo opera y mantiene correctamente. Este producto cumple con las estrictas normas de seguridad Por favor lea todo este manual antes de operar el equipo.
Medidas importantes de seguridad ADVERTENCIA: La presencia de este símbolo indica que se trata de instrucciones importantes de seguridad que se deben respetar para evitar poner en peligro su seguridad personal y/o material y la de otras personas. Lea y siga todas las instrucciones de este manual antes de poner en funcionamiento esta máquina.
Page 36
Esté atento a la cortadora y a la dirección de la descarga Los datos estadísticos muestran que los operadores de 60 de los aditamentos y no apunte a nadie. Nunca opere la años y mayores se ven involucrados en un alto porcentaje cortadora de césped sin que estén en su lugar apropiado la de lesiones relacionadas con tractores corta césped.
Page 37
No cambie a transmisión neutral para descender. El exceso de Servicio velocidad puede hacer que el operador pierda el control de la máquina, ocasionando lesiones graves e incluso la muerte. Manejo seguro de la gasolina: No remolque cargas pesadas detrás de los aditamentos Para evitar lesiones personales o daños materiales sea (carrito de basura cargado, podadora de rodillos, etc) en sumamente cuidadoso al manipular la gasolina.
Page 38
Antes de limpiar, reparar o inspeccionar la máquina, Según la Comisión de Seguridad de Productos para el compruebe que la(s) cuchilla(s) y todas las partes en Consumidor de los Estados Unidos (CPSC) y la Agencia movimiento se hayan detenido. Desconecte el cable de la de Protección Ambiental de los Estados Unidos (EPA), bujía y póngalo haciendo masa contra el motor para evitar este producto tiene una vida útil media de siete (7) años,...
Page 39
Safety Symbols This page depicts and describes safety symbols that may appear on this product. Read, understand, and follow all instructions on the machine before attempting to assemble and operate. Symbol Description LEA EL MANUAL(S) DEL OPERADOR leído, entienda, y siga todas las instrucciones en el manual(s) antes de procurar montar y funcionar PELIGRO—...
Page 40
2 — M ectiOn edidas iMpOrtantes de seguridad...
Montaje y Configuración Montaje y Configuración CONFIGURACIóN DEL TRACTOR NOTA: Si la batería se pone en servicio después de la fecha indicada en la parte superior / lado de la batería, cargue la NOTA: Este Manual del operador cubre una gama de batería según las instrucciones en la sección Mantenimiento de especificaciones de productos de varios modelos.
Page 42
Instalación del volante Instalación del asiento Si el volante del tractor no se envía instalado, debajo de la tapa del Si el asiento de su tractor no se adjunta en la fábrica, siga las volante, dentro del mismo, se entregan embalados los elementos instrucciones que aparecen a continuación para adjuntarlo.
Page 43
apón de abonadora (si cuenta con este equipo) Realice la carga de gasolina y aceite del motor según las instrucciones del Manual del propietario/ operador del motor En los tractores equipados con clavija de abono, la misma se que se entrega con el tractor. Lea las instrucciones con atención. encuentra dentro de la abertura de descarga de la plataforma de corte.
Controles y Características Palanca de control de velocidad y freno de mano Pedal de freno/ embrague Palanca de Perilla del obturador Módulo del interruptor de estrangulador/obturador (En algunos modelos) encendido Palanca de cambios Palanca de potencia de arranque Palanca de elevación (PTO) (enganche de cuchilla) de la plataforma Figura 4-1...
Page 45
PALANCA DE CONTROL DEL REGULADOR Encendido/luces La palanca de control del estrangulador está ubicada del lado derecho del tablero de instrumentos del tractor. Esta palanca Encendido controla la velocidad del motor y, en algunos modelos, cuando se la apagado empuja totalmente hacia adelante, también controla el obturador. Cuando se lo coloca en una posición determinada, el regulador mantiene una velocidad de motor uniforme.
Page 46
Para detener el motor, gire la llave de encendido en sentido contrario a las agujas del reloj hasta la posición OFF (apagado). Vea la Fig. 4-3B. Módulo del interruptor de encendido Para encender el motor, inserte la llave en el interruptor de encendido y gírela en el sentido de las agujas del reloj hacia la posición START (encendido).
Funcionamiento Funcionamiento Modelos con modo de precaución en marcha atrás ADVERTENCIA • Con la llave de encendido en la posición de CORTE DE CÉSPED NORMAL, el motor se apagará automáticamente si la palanca PTO (enganche de cuchilla) se coloca en posición enganchada PARA EVITAR LESIONES (ON) con la palanca de cambios en marcha atrás.
Page 48
esione el BOTóN DE MARCHA ATRÁS (botón triangular de Encendido del motor color naranja) en la esquina superior derecha del módulo del interruptor de llave. La luz indicadora roja en la esquina ¡ADVERTENCIA! No opere el tractor si el sistema superior izquierda del módulo del interruptor de llave se de bloqueo funciona mal.
Page 49
Conducción del tractor Coloque la palanca de control de velocidad en la posición deseada. ¡ADVERTENCIA! Evite arrancar súbitamente, Coloque la palanca de cambios en la posición FORWARD desarrollar excesiva velocidad y detenerse de (marcha directa) o REVERSE (marcha atrás), y siga el repente.
Page 50
Corte de césped abono. • Coloque siempre la palanca de control del regulador en ¡ADVERTENCIA! Para ayudar a evitar el contacto la posición FAST (velocidad rápida) (liebre) y déjela en esa con las cuchillas o una lesión por algún objeto que sea posición mientras realiza el corte de césped.
Mantenimiento y Ajustes MANTENIMIENTO NOTA: Consulte el Manual del Motor Propietario/ Operador que viene embalado con su unidad, para obtener información sobre ¡ADVERTENCIA! Antes de realizar tareas de la cantidad y la viscosidad adecuadas del aceite del motor. mantenimiento o reparaciones, desconecte la Depurador de aire potencia de arranque (PTO), mueva la palanca de cambios a la posición neutral, coloque el freno de...
Page 52
Limpieza de la batería Deck Wash System™ Limpie la batería retirándola del tractor y lavándola con Si la plataforma de su tractor está equipada con un puerto de bicarbonato de sodio y solución de agua. Si es necesario, raspe agua en su superficie, como parte de su sistema Deck Wash los bornes de la batería con un cepillo de alambre para quitar los System™, siga estas instrucciones para utilizar este dispositivo.
Page 53
IMPORTANTE: Nivelación lado a lado Después de limpiar la plataforma con el sistema Deck Wash System™, regrese a la posición del operador y Si la plataforma de corte estuviera realizando el corte de césped enganche la potencia de arranque (PTO). Mantenga la plataforma de forma despareja, puede realizarse un ajuste lado a lado.
Page 54
Calendario de mantenimiento Antes Cada Cada Cada Cada Antes de cada uso 10 horas 25 horas 50 horas 100 horas de almacenar Limpie el capó/los respiraderos Inspeccione el nivel de aceite del motor Controle el filtro de aire para ver si hay piezas sucias, sueltas o dañadas Limpie y vuelva a lubricar el depurador de espuma del filtro de aire...
Servicio Extracción de la plataforma de corte NOTA: Los modelos equipados con plataforma de 38 pulgadas tienen una polea loca de plataforma. Los modelos equipados con plataforma de 42 y de 46 pulgadas tienen dos poleas locas de plataforma. Para extraer la plataforma de corte, proceda de la siguiente manera: Coloque la toma de fuerza (PTO) (enganche de cuchilla) en la posición OFF (desconectada) y coloque el freno de mano.
Page 56
Neumáticos CARGA ¡ADVERTENCIA! ¡ADVERTENCIA! Al cargarse, las baterías emiten Nunca exceda la presión máxima un gas que puede causar explosiones. Cargue la de inflado que se indica en los laterales de los batería en un área bien ventilada y aléjela de una neumáticos.
Page 57
Cuchillas de corte ¡ADVERTENCIA! Antes de extraer la(s) cuchilla(s) para afilarla(s) o reemplazarla(s), asegúrese de apagar el motor, retirar la llave de encendido, desconectar el(los) cable(s) de la bujía y hacer masa contra el motor para impedir el encendido accidental del motor. Proteja sus manos utilizando guantes pesados o un paño para asir la cuchilla de corte.
Page 58
Cambio de la correa inferior de la plataforma Poleas locas (plataformas de 46”) NOTA: Para cambiar la correa inferior de la plataforma del tractor es necesario extraer varios componentes. Póngase en contacto con un Distribuidor de Servicio MTD autorizado para hacer cambiar la correa de transmisión inferior, o llame por teléfono a Atención al Cliente, según lo indicado en la página 2, para informarse sobre la forma de pedir un Manual de mantenimiento.
Page 59
Plataforma de 42 pulgadas Polea del motor Ménsula intermedia Poleas locas de la plataforma Figura 7-8 Plataforma de 46 pulgadas Polea del motor Poleas locas Cubierta de la correa Figura 7-9 7— s ección erviciO...
Solución de Problemas Problema Causa Solución El motor no arranca La potencia de arranque (PTO)/cuchilla está Coloque la perilla (o palanca) en posición OFF conectada. (desenganchada). Se ha desconectado el cable de la bujía. Conecte el cable a la bujía. El depósito de combustible está...
Piezas de reemplazo Correa de transmisión (plataforma de corte) Plataforma de 38” 754-04062 Correa de transmisión (plataforma de corte) Plataforma de 42” 754-04060B Correa de transmisión superior (plataforma de corte) Plataforma de 46” 754-04142 Correa de transmisión inferior (plataforma de corte) Plataforma de 46” 754-0349 Cuchilla de plataforma (Plataforma de 38”) 742-0610A...
Aditamentos y accesorios Los siguientes aditamentos y accesorios son compatibles con los Tractores Corta Césped Modelo Serie 700. Consulte al minorista a quien le adquirió su tractor, a un distribuidor autorizado MTD de mantenimiento o llame al teléfono (800) 800-7310 para obtener información sobre precios y disponibilidad.
DECLARACIÓN DE GARANTÍA DEL CONTROL DE LAS EMISIONES DE CALIFORNIA DERECHOS Y OBLIGACIONES DE SU GARANTÍA El Departamento de los Recursos de Aire de California y MTD Consumer Group Inc, se complacen en explicar la garantía del sistema de control de emisiones por evaporación de su cortadora de césped 2007.
Page 64
GARANTÍA LIMITADA DEL FABRICANTE PARA La siguiente garantía limitada es otorgada por MTD LLC con respecto ejemplo lubricantes, filtros, afiladores de cuchillas, sincronización a nuevos productos adquiridos y utilizados en Estados Unidosy/o sus del motor, los ajustes de los frenos, del embrague o de la plata- territorios y posesiones, y por MTD Products Limited con respecto a forma y el deterioro normal del acabado exterior debido al uso o nuevos productos adquiridos y utilizados en Canadá...