Important Safety Information; Specifications - GE RAK148F2 Owner's Manual And Installation Instructions

IMPORTANT SAFETY INFORMATION

READ ALL INSTRUCTIONS BEFORE USING
WARNING
FIRE AND SHOCK HAZARD
• Always turn off power at the main power supply
before installing, cleaning or removing the
thermostat. Failure to do so could result in
electrical shock hazard.
• Do not use on voltages over 30 VAC. Higher
voltages will damage the thermostat and could cause
shock or fire hazard.
NOTICE
• All wiring must conform to local and national
electrical and building codes.
• Use this thermostat only as described in this
manual.

Specifications.

Electrical rating: • 24 VAC (18–30 VAC)
Operating temperature range: 40°F–99°F (4°C–37°C)
Temperature set range: 60°F–85°F (15°C–29°C)
Accuracy: ± 1°F (± 0.5°C)
System configurations:
RAK148F2: 2-stage heat (heat pump/resistance heat), 1-stage
cool, 2-speed fan
RAK164F2: 1-stage heat (resistance heat), 1-stage cool,
2-speed fan
Terminations: R, C, W, Y, GH, GL, B (RAK148F2);
Wiring: Maximum wiring length is 66ft (20 meters) for
AWG18
Maximum wiring length is 60ft (18 meters) for
AWG20
2
• 1 amp maximum per terminal
• 4 amp maximum total load
R, C, W, Y, GH, GL (RAK164F2)