Recovery After Replacing Core P.c.b. / Core P.c.b.交換後のリカバリー; ファームウエアのアップデート - Yamaha MCX-A10 Service Manual

Musiccast digital audio terminal/speaker system
Hide thumbs Also See for MCX-A10:
Table of Contents

Advertisement

RECOVERY AFTER REPLACING CORE P.C.B. /CORE P.C.B.交換後のリカバリー
After replacing the CORE P.C.B. or IC11, perform the re-
covery procedure as follows.
1) Enter the system ID.
For the details, refer to ENTERING SYSTEM ID (p. 13-15).
2) Update the firmware.
For the details, refer to UPDATING FIRMWARE (p. 9-12).
3) Reset the system as follows.
a. Keep pressing the "TOP MENU" key for 2 seconds,
and the TOP MENU is displayed.
b. Using the "CONTROLLER" key, select the menu items
as follows.
Setup → System → System reset
c. The System Reset screen appears.
d. Press the "PLAY" key.
This resets MCX-A10 and restores the factory set-
ting of parameters. The power to MCX-A10 is turned
OFF/ON automatically.
UPDATING FIRMWARE /ファームウエアのアップデート
After replacing CORE P.C.B. or IC11, the firmware must be
updated.
For updating the firmware, use the recovery CD and ex-
ecute it via the network from MCX-1000.
The detailed information regarding supply of the recovery
CD will be provided in Service News.
Items required
Recovery CD
MCX-1000
Ethernet Hub
CAT-5 Straight Cable, 2 pcs
TV monitor
Video cable
Preparation
Execute updating of MCX-1000 in advance.
For the details, refer to UPDATING FIRMWARE in the
MCX-1000 Service Manual.
CORE P.C.B.またはIC11を交換した場合、下記の手順でリ
カバリーを行います。
1) システムIDの書き込みを行います。
詳しくは 「システムIDの書き込み」 ( 13∼15ページ) を参
照してください。
2) ファームウエアのアップデートを行います。
詳しくは 「ファームウエアのアップデート」 ( 9∼12ペー
ジ) を参照してください。
3) システムリセットを行います。
a."TOP MENU" キーを2秒間押し続けます。
TOP MENUが表示されます
b."コントローラー" キーを使ってメニューを下記のよ
うに選択します。
Setup → System → System Reset
c. System Reset画面が表示されます。
d."PLAY" キーを押します。
MCX-A10はリセットされ工場出荷時のパラメータに
戻ります。
MCX-A10は自動的に電源がOFF/ONされます。
CORE P.C.B.またはIC11を交換した場合、ファームウエア
のアップデートが必要です。
ファームウエアのアップデートはリカバリーCDを使用
し、MCX-1000からネットワークを経由して行います。
なお、リカバリーCDの供給に関する詳細は、サービス
ニュースでお知らせします。
用意するもの
リカバリーCD
MCX-1000
Ethernet Hub
CAT-5 ストレートケーブル  2本
TVモニター
ビデオケーブル
準備
あらかじめMCX-1000をアップデートします。
詳しくはMCX-1000サービスマニュアルの 「ファームウ
エアのアップデート」 を参照してください。
MCX-A10/MCX-SP10
9

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mcx-sp10Mcx-1000

Table of Contents