Yamaha MCX-A10 Service Manual page 20

Musiccast digital audio terminal/speaker system
Hide thumbs Also See for MCX-A10:
Table of Contents

Advertisement

MCX-A10/MCX-SP10
When the unit can't play music.
<Step1>
music lists can be taken
<Step2>
Check that time counts
<Step3>
Can you hear the music ?
In case of CPU trouble on CORE Board
<Step1>
Check the RESET signal
<Step2>
<Step3>
<Step4>
In case of other troubles
• It is very difficult to find any other trouble around LSI because LSI is connected using the bus.
• However, if the trouble cause is not in the bus but something else, it may be possible to find it by using the TEST mode.
- Push TOP MENU & PLAY at the same time and power on.
- Monitor the log using LCD on MCX- A10.
20
Check that the
NG
from the server.
Play any songs
OK
NG
in "Play Info" menu.
OK
NO
YES
Good condition
NG
193pin of CPU (IC3 in CORE Board ) is OK?
OK
NG
Check CPU clock
156pin and 162pin of CPU (IC3 in CORE Board ) is OK?
OK
NO
Was accessing
FLASH executed?
YES
26pin of Flash memory (IC11 in CORE Board ) is OK?
YES
Does the FLASH /CS
work continuously?
NO
MAIN CPU may work well
• Trouble of network
• Trouble of wireless LAN card
• Trouble of CPU circuit in CORE Board
• Trouble of audio circuits in D-AMP Board
Reset circuit is defective
X'tal is defective
MAIN CPU may not boot up
Flash memory's trouble
or the SDRAM (IC7, 8) is defective

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mcx-sp10Mcx-1000

Table of Contents