Hitachi wj200 series Quick Reference Manual page 109

Note 5) Inverter trips with "E98", "E99" or hardware shutoff with "-S--".
External error detection is possible (E98).
Note 6) Inverter trips with "E99" or hardware shutoff with "-S--".
External error detection is invalid.
Note 7) Hardware shutoff with "-S--". Please check EDM externally.
Note 8) Inverter trips with "E99" or hardware shutoff with "-F01","-F02","-F01","-F02","-S--".
GS1 or GS2 delay detection is valid. EDM is checked inside.
Note 9) Hardware shutoff with "-F01","-F02","-F01","-F02" or "-S--".
GS1 or GS2 delay detection is invalid. Please check EDM externally.
・The following table shows the displayed when safe stopping .
Display of the operator
-F01
-F02
-F10
-F20
・The following table shows the safety action by GS1,GS2,EDM status and set point of b145.
E98 = Outside failure, E99 = Inside failure
GS1 Close
GS2 Close
EDM
Set 00
－
Set 01
－
Set 02
－
Set 03
－
Set 04
－
Set 05
－
Set 06
－
Safe stopping
-S--
Delay detection by the GS1 under running return
operation.
Delay detection by the GS2 under running return
operation.
Delay detection by the GS1 under safe stopping
operation.
Delay detection by the GS2 under safe stopping
operation.
Open Close
Close Open
Open
－ －
E37 E37
E98 E98
－ －
－ －
-F01 -F02
or or
-F20 -F10
-F01 -F02
or or
-F20 -F10
Description
Open Close
Open Close
－ －
E37
－ － － －
E99 E99
E99 E99
－ －
E99 E99
－ －
109
Open Close
Close Open
Close (Act)
－ －
E37 E37
E99 E99
E99 E99
－ －
E99 E99
－ －
Open
(Shut Act)
Open
－
E37
-S--
-S--
-S--
-S--
-S--