Rtc Battery - HP ProBook 430 G1 Maintenance And Service Manual

RTC battery

Description
RTC battery
Before removing the RTC battery, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet,
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
5.
Remove the following components:
a.
Service door (see
b.
Keyboard (see
c.
Top cover (see
Remove the RTC battery:
1. Position the computer upright with the front toward you.
2. Use a screwdriver to loosen the battery from the socket (1).
3. Lift the battery from the system board (2).
Reverse this procedure to install the RTC battery.
Battery on page 35).
Service door on page
Keyboard on page 37)
Top cover on page 50)
43).
Component replacement procedures
Spare part number
684248-001
55