MX5100, WSM
Replacing Fuse
1. The tractor electrical system is protected from potential damage
by fuses.
A blown fuse indicates that there is an overload or short
somewhere in the electrical system.
2. If any of the fuses should blow, replace with a new one of the
same capacity.
IMPORTANT
• Before replacing a blown fuse, determine why the fuse blew
and make any necessary repairs.
procedure may result in serious damage to the tractor
electrical system. Refer to "TRABLESHOOTING" section of
this manual.
Protected Circuit
Fuse No.
Capacity
(1)
10 A
(2)
10 A
(3)
5 A
(4)
5 A
(5)
5 A
(6)
5 A
(7)
15 A
(8)
15 A
(9)
15 A
(10)
50 A
(11)
50 A
(12)
30 A
a : Fuse Box
Replacing Light Bulb
1. Head lights and rear combination lights :
Take the bulb out of the light body and replace with a new one.
2. Other lights :
Detach the lens and replace the bulb.
Light
Head Light
Tail Light
Turn Signal / Hazard Light (Rear)
Turn Signal / Hazard Light (Rear)
Instrument Panel Light
G-42
G GENERAL
Failure to follow this
Protected circuit
Working Light
Panel
Head Light
Key Stop
Glow Lamp
Starter Relay
Head Lamp Relay (Hi)
Head Lamp Relay (Lo)
Hazard
Key Switch
Main
Key Stop
W10393150
Capacity
60 W / 55W
8 W
23 W
27 W
1.7 W
W10396590
Need help?
Do you have a question about the MX5100 and is the answer not in the manual?
Questions and answers