Canon AS-100M Field Service Manual page 74

(4) After the additional installation has been completed, solder the
JP circuit of (a) section illustrated in Fig. 4.3.11 as in
Fig. 4.3.12.
JP circuit
2 o ^ i l
(a) section
© Remove CPU + I/O-CONT
located on CPU + I/O-CONT P.C.B
Chapter 1).
2 •-# o 1
(a) section
Fig. 4.3.12
P.C.B from MAIN UNIT and set SW2 No. 5
4-30
Switch JP circuit
from screen 1 to
screen 2.
(Re solder JP
circuit screen 1,
on screen 2.)
to "OFF". (Refer to 1.2.2 of