Table of Contents
Advertisement
7.3.2
CP/M-86 system commands
Control character commands
(1)
Characters
CTRL-C
Current program under specified console is
CTRL-E
Returns printer carriage, but this command is not trans
ferred to CP/M-86.
CTRL-H
Back space
CTRL-J
Ends data input and line feed.
CTRL-M
Similar to command of carriage return.
This command echoes all commands designated from the
CTRL-P
console to the printer.
more, it stops echoing the via console commands to the
printer.
is connected to the computer system.
CTRL-R
Current command typed in again, CTRL-R command is
serviceable after pressing RUN or DEL key.
CTRL-S
Temporarily stops output of list into console, however,
Same command is input once more, the output is resumed.
Console list.
CTRL-U
Deletes line.
While at the same time, CRT display shows# , with console
moving down by one line and waiting for a new command.
CTRL-X
All characters in line with are deleted.
CTRL-Z
String or field separator.
Description
When this command is input once
This command is effective only when the printer
Table 7.3.3
7-8
suspended.
Advertisement
Table of Contents
