Table of Contents
Advertisement
BHydrostatic Transaxle Bypass Lever
To avoid serious injury or death:
A Do not use bypass levers on or around slopes.
The machine can runaway and cause injury or
death easily.
A Do not push the machine without rotating the bypass
levers, or transmission damage may occur.
A Never rotate the levers with the engine running.
1. From the front of the transaxle, rotate the bypass lever
to the right.
Do this for both transaxle (LH and RH).
See the figure below.
(1) Bypass lever
2. After moving the machine, rotate both the right side
and left side bypass levers completely to the left.
(R) "ROTATE THE LEVER TO
THE RIGHT"
OPERATING THE MACHINE
27
- Quick Links:
- Servicing of Machine
- Lubricants and Fuel
Hide quick links:
Advertisement
Chapters
Table of Contents
Troubleshooting
Need help?
Do you have a question about the Z723 and is the answer not in the manual?
Questions and answers
How do you replace the PTO switch on the Kabota Z723?
To replace the PTO switch on a Kubota Z723, follow these steps:
1. Turn Off the Mower – Ensure the mower is off, and remove the key for safety.
2. Disconnect the Battery – Disconnect the negative terminal to prevent electrical issues.
3. Locate the PTO Switch – The switch is typically on the control panel.
4. Remove the Old Switch – Gently pull or unscrew the switch from its mounting position and disconnect the wiring harness.
5. Install the New Switch – Connect the wiring harness to the replacement PTO switch (such as K3011-62300), ensuring a secure fit.
6. Secure the Switch – Mount the switch back into place.
7. Reconnect the Battery – Reattach the negative terminal.
8. Test the Switch – Turn on the mower and activate the PTO switch to ensure it engages properly.
This process ensures a proper replacement using a compatible switch like the K3011-62300.
This answer is automatically generated