Configuring Snmp Subnetwork Properties; Configuring Snmp Ied Properties - ABB COM600 series User Manual
Snmp opc server
Hide thumbs
Also See for COM600 series:
- Data historian operator's manual (140 pages) ,
- User manual (104 pages) ,
- Configuration manual (66 pages)
Table of Contents
Advertisement
3.4.3.
3.4.4.
20
COM600 series, Version 4.1
SNMP OPC Server User's Manual
Configuring SNMP Subnetwork properties
The SNMP OPC Server subnetwork properties that can be configured and value ranges
for them can be found in Table 3.4.3-1. The actual configuration by using SAB600 is
performed as described in 3.4.1, General about configuring objects.
Table 3.4.3-1 SNMP Subnetwork properties
Property/Para-
Value or Value range/ Default
meter
Basic
In Use
In Use
Not In use
Default: In Use
Configuring SNMP IED properties
The SNMP OPC Server IED properties that can be configured and value ranges for them
can be found in Table 3.4.4-1. The actual configuration by using SAB600 is performed
as described in 3.4.1, General about configuring objects.
Table 3.4.4-1 SNMP IED properties
Property/Para-
Value or Value range/ Default
meter
Basic
In Use
In Use
Not In use
Default: In Use
Simulation Mode
False
True
Default: False
SNMP Version
SMNP v1
SNMP v2c
SNMP v3
Default: SNMP v2c
Addresses
IP Address
127.0.0.1
Community
Description
Controls if the device communication is
initially in use or not.
Description
Specifies whether IED is in use or not.
Defines whether IED is used in simulation
mode.
SNMP version supported by the network
device.
IP address of the IED.
1MRS757276
Advertisement
Table of Contents
