Setup; Prime And Flush Storage Fluid - Graco Magnum X5 Manual
Airless paint sprayer
Hide thumbs
Also See for Magnum X5:
- Owner's manual (56 pages) ,
- Repair and parts manual (52 pages) ,
- Operation manual (35 pages)
Table of Contents
Advertisement
Setup
Setup
Prime and Flush Storage Fluid.
Before you use your sprayer for the first time or begin a
new spraying project, you need to prime the sprayer and
flush the storage fluid out of the sprayer.
•
When spraying water-based materials, flush the
system thoroughly with water. The water flowing out
of prime tube should be clear and solvent-free
before you begin spraying the water-based mate-
rial.
•
To avoid fluid splashing back on your skin or into
your eyes, always aim gun at inside wall of pail.
1. Unscrew tip and guard assembly from gun.
2. Uncoil hose and connect one end to gun. Use two
wrenches to tighten securely.
3. Connect other end of hose to sprayer.
NOTE: If hose is already connected, make sure connec-
tions are tight.
14
ti9714a
ti9681a
ti11456a
4. Turn Pressure Control Knob all the way left
(counter-clockwise) to minimum pressure.
5. Make sure the power switch is OFF and the sprayer
is unplugged.
6. Separate prime tube (smaller) from suction tube
(larger).
7. Place prime tube in waste pail.
8. Submerge suction tube in water
WATER
ti9344a
ti2810a
ti2039a
WASTE
ti9652a
ti9651a
332689D
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Magnum X5 and is the answer not in the manual?
Questions and answers
my x5 is leaking paint from inside the housing
Your Graco Magnum X5 is leaking paint from inside the housing because the pump packings have worn out. When this happens, paint begins to leak down the outside of the pump. It is recommended to replace the pump at the first sign of leakage to prevent additional damage to the drive train.
This answer is automatically generated
my x5 isleaking paint from the housing
Your Graco Magnum X5 is leaking paint from the housing because the pump packings have worn out. When this happens, paint begins to leak down the outside of the pump. If you notice leakage, you should replace the pump immediately to prevent additional damage to the drive train.
This answer is automatically generated