Download Print this page
Hayward 6060 Owner's Manual

Hayward 6060 Owner's Manual

Booster pump
Hide thumbs Also See for 6060:

Advertisement

Quick Links

Booster Pump
The Hayward 6060 booster pump is specifically engineered for the demanding requirements of today's in-ground swimming pool cleaning
systems. The 6060 booster pump includes an improved seal and impeller design that will provide many years of efficient, dependable,
corrosion-free service. The advanced design provides superior performance while reducing maintenance requirements.
Basic safety precautions should always be followed, including the following: Failure to follow instructions
can cause severe injury and/or death.
This is the safety-alert symbol. When you see this symbol on your equipment or in this manual, look for
one of the following signal words and be alert to the potential for personal injury.
WARNING warns about hazards that could cause serious personal injury, death or major property
damage and if ignored presents a potential hazard.
CAUTION warns about hazards that will or can cause minor or moderate personal injury and/or property
damage and if ignored presents a potential hazard. It can also make consumers aware of actions that are
unpredictable and unsafe.
The NOTICE label indicates special instructions that are important but not related to hazards.
Owner's Manual
Model 6060
IMPORTANT SAFETY INSTRUCTIONS
SAVE THIS OWNER'S MANUAL
Hayward Pool Products
620 Division Street, Elizabeth, NJ 07207
Phone: (908) 355-7995
www.hayward.com
USE ONLY HAYWARD GENUINE REPLACEMENT PARTS
Contents
Product Warnings......................2
Introduction................................4
Installation..................................4
Replacement Parts....................10
Trouble Shooting........................11
Registration ...............................12
IS6060 Rev C
1

Advertisement

loading
Need help?

Need help?

Do you have a question about the 6060 and is the answer not in the manual?

Questions and answers

Summary of Contents for Hayward 6060

  • Page 1: Table Of Contents

    The Hayward 6060 booster pump is specifically engineered for the demanding requirements of today’s in-ground swimming pool cleaning systems. The 6060 booster pump includes an improved seal and impeller design that will provide many years of efficient, dependable, corrosion-free service. The advanced design provides superior performance while reducing maintenance requirements.
  • Page 2: Product Warnings

    Use only y a low pressur e (below 5 PSI) high volum me blower when air purging the e pump, filter, o or piping. USE ONLY Y HAYWARD G ENUINE REPLA ACEMENT PAR...
  • Page 3 Unawareness of impending danger. Failure to perceive heat. Failure to recognize the need to leave the spa. Physical inability to exit the spa. Fetal damage in pregnant women. Unconsciousness resulting in danger of drowning. SAVE THESE INSTRUCTIONS USE ONLY HAYWARD GENUINE REPLACEMENT PARTS...
  • Page 4: Introduction

    General Information Introduction This manual contains information for the proper installation and operation of the Hayward 6060 booster pump. The instructions in this manual MUST be followed precisely. Failure to install according to defined instructions will void warranty. Product Benefits •...
  • Page 5 Plumbin For the be st performanc ce, Hayward re ecommends t the use of the supplied unio on fittings wit th 1-½” pipe. If you are using the...
  • Page 6 Motor Electric V/A Wire Size / Breaker HP (kW) HP (kW) Voltage Amps Amps 1.25 (0.93) 0.75 (0.56) 208 - 230 / 115 6.9 – 6.8 / 13.3 14 / 12 10 / 20 USE ONLY HAYWARD GENUINE REPLACEMENT PARTS...
  • Page 7 If filtration system pump is to be turned off for any reason, then the booster pump must be turned off before turning off the filtration system pump. NOTE - If the 6060 booster pump is used to replace the booster pump in an existing pressure cleaner installation, then the cleaner operating pressure should be reset according to the cleaner manufacturer’s recommended procedure.
  • Page 8 The express limited warranty above constitutes the entire warranty of Hayward Pool Products with respect to its’ pool products and is in lieu of all other warranties expressed or implied, including warranties of merchantability or fitness for a particular purpose. In no event shall Hayward Pool products be responsible for any consequential, special or incidental damages of any nature.
  • Page 9 A. Disconnect all electrical power service to pump before beginning shaft seal replacement. B. Only qualified personnel should attempt rotary seal replacement. Contact your local authorized Hayward Dealer or service center if you have any questions.
  • Page 10: Replacement Parts

    Seal Plate Assembly (incl. Drain Plug w/O-Ring) SPX4000FG Drain Plug w/O-Ring AX6060G Motor Support SPX3200Z5 Motor Bolt SPX2707Z1B Motor, ¾ HP, Square Flange 6060HKIT Hose Kit (incl. Hose, 2 Hose Fittings, and 4 Hose Clamps) USE ONLY HAYWARD GENUINE REPLACEMENT PARTS...
  • Page 11: Trouble Shooting

    Solution: Contact qualified professional to check that the wiring gauge is heavy enough. NOTE: Your Hayward pump motor is equipped with an “automatic thermal overload protector.” The motor will automatically shut off if power supply drops before heat damage can build up causing windings to burn out. The “thermal overload protector”...
  • Page 12: Registration

    Ground ove Ground Or RE EGISTER YOUR R WARRANTY O ON-LINE AT WW.HAYWARD D.COM Hayward is a registered tradema ark of Hayward Indust tries, Inc. © 2016 Hay yward Industries, Inc. USE ONLY H HAYWARD GEN NUINE REPLAC CEMENT PART...