Icm Playing/Erasing/Recording By Remote Operation - Sanyo sfx-32 Instruction Manual

48
ICM Playing and Erasing
1
r
000
Dial to the SFX-32.
000
000
@o@
2
Enter the 4-digit ID number while OGM
is released.
A beep is heard for an acceptance.
3
Operate your desired function.
New ICM playing Press [#] [1] ~ Only new ICM is played.
All ICM playing Press [#] [4] ~ All ICM is played.
ICM erasing Press [*] [0] during playing.
or
within 3 sec. after the ICM playing is finished.
The current ICM playing is erased.
9 You hear three beeps when all of ICM playing is finished.
Enter the second digit of the remote number within 10 seconds after entering
the first digit.
After playing or erasing, a beep is heard, if you need continuous operation,
enter the next remote code within 10 seconds after the beep.
High Speed Playing
Press PI ~1 while ICM is playing.
The SFX-32 plays ICM 1.25 times as fast as normal playing speed.
I Skip Playing ~
Forward Skip
Press ~] ~] while ICM is playing.
SFX-32 skips the current playing ICM and plays next ICM.
* If there is no ICM recorded when you skip the current playing
function is not carried out and plays current ICM continuously.
Reverse Skip
Press PI ~1 while ICM is playing.
SFX-32 skips the current playing ICM and plays previous ICM,
Re-play
ICM, skip
Press ~ ~ while ICM is playing.
SFX-32 re-plays the current ICM from begining.