Siemens SINUMERIK 828D Operating Manual page 299

Parameter Description
Through drilling
Yes
•
Through drilling with feedrate FD
No
•
ZD - (only for Depth for feedrate reduction (abs) or depth for feedrate reduction in relation to Z1 (inc)
through drilling
"yes")
FD - (only for Reduced feedrate for through drilling referred to drilling feedrate F
through drilling
Feedrate for through drilling (ShopTurn)
"yes")
Feedrate for through drilling (G code)
DT - (only for
Dwell time (at final drilling depth) in seconds
•
through drilling
Dwell time (at final drilling depth) in revolutions
•
"no")
Parameters in the "Input simple" mode
G code program parameters
Input
RP Retraction plane
Parameter Description
Machining
•
position (only for G
code)
•
Machining
•
surface
•
•
(only for ShopTurn)
•
Turning
Operating Manual, 01/2015, 6FC5398-8CP40-5BA2
Simple
•
mm
Single position
Drill hole at programmed position.
Position pattern
Position with MCALL
Face C
Face Y
Peripheral surface C
Peripheral surface Y
Programming technology functions (cycles)
ShopTurn program parameters
T Tool name
D Cutting edge number
F Feedrate
S / V Spindle speed or constant
cutting rate
9.1 Drilling
Unit
mm
%
mm/min or
mm/rev
Distance/min
or dis-
tance/rev
s
rev
mm/min
mm/rev
rpm
m/min
299