Vertical Line Adj - Samsung ST76 Service Manual

Adjustment

7-6 Vertical line ADJ

■ Set the maximum number of vertical line to prevent displaying a big vertical line.
<Adjustment method>
1. Prepare the AE TESTER.
* Luminance specification of the Light box is
* The Light box is located at 10mm+-1mm with the body tube open.
* The colour temperature specification of the Light box is 5500K.
2. Save the applicable adjustment file to the memory card.
3. After inserting the memory card containing the program file to the camera, set the camera to the AE TESTER.
Light source box
4. Adjust the LV value of the AE METER to 12.
5. When you turn on the power of the camera, the adjustment will start automatically.
To do the compensation of vertical line, check the minimum and maximum ratio of EVC and ISO
q
Compare the checked information with basic information. (Record the real q'ty and ratio of vertical line)
w
Write the vertical line at the file.
e
6. When the adjustment is completed, the camera will automatically be turned off.
<Adjustment result>
On the memory card, open and check if a CSV file was generated from the adjustment.
<Restriction>
If the capacity of CSV file is more than 30KB, clear all of the previous data and then, record
7-8
LV 12.
Fig. 7-6
Light source box
Copyright© 1995-2012 SAMSUNG. All rights reserved.
Camera