Table of Contents
Advertisement
Adjustment
7-5 Punt ADJ
■ Adjustment objective: After replacing the MAIN PCB and BARREL, you must decide the AF search range so that the optimal
■ Necessary equipment: Infinity Collimator
<Adjustment method>
1. Save the adjustment file to the memory card and install it on the camera.
2. Refer to the following adjustment environment specification to adjust the focus.
1) Used specification of Infinity Collimator
- Set the illuminance specification of the Collimator to 6 LV.
- Maintain distance of less than 1cm between the end of the camera body tube to the lens surface of the Infinity Collimator.
- The camera must be fixed while the adjustment is made.
2) Used specification for infinite object
- The camera must be fixed with a tripod and levelled condition must be maintained.
- Set up the camera toward a building or object in infinite distance (more than 500m). (Do not use the chart)
- Set a cathedral, apartment or object with high contrast in day environment/AF area display.
7-6
focus can be identified by the body tube.
Infinity Collimator
Camera
Tripod
Fig. 7-4
Copyright© 1995-2012 SAMSUNG. All rights reserved.
Hide quick links:
Advertisement
Table of Contents
