Reassembly Of Barrel - Samsung ST76 Service Manual

3-4 Reassembly of barrel

3-4-1 How to use the lubricant for anti-friction to the ASSY BARREL assembly.
■ Anti-friction lubricant serves to prevent from the possibility of defective parts.
■ Replacement parts are required to apply the lubricant before installing the ASSY BARREL.
!
CAUTION
■ HANARL is volatile product. Keep its container tightly covered.
■ Make sure to shake the HANARL well first before you use it because it has a lot of particles
in the bottom. (Otherwise it becomes ineffective.)
■ Shake the HANARL until there are no lumps at all and apply it with brush.
1. Type of lubricant
<Table. 3-2 lubricant Information>
Component Name
Lens Base
Barrier assy Related Parts
AF motor Related Parts
Others components
■
Brand Name: Kanto Kasei(http://www.kanto-kasei.co.jp/e/index.html)
* To purchase this product simply click on the URL above.
2. Instructions
<Table. 3-3 Lubricating with Grease: Lens Base>
The pins that work AF Lens
1) Apply the Grease KG-513 to the two pins of AF Lens.
2) Do not get any Grease on the AF lens.
3) Apply a light coating of the Grease KG-513 and
make sure not to get any on the AF lens and other
components.
Copyright© 1995-2012 SAMSUNG. All rights reserved.
Where to apply
Sliding contact surfaces of AF Lens.
Friction part and the pins
Clip part and lead screw
Inside and outside friction surface
Apply Grease
Name of lubricant
Grease KG-513
RX-410
NFH-743C
HANARL UD-420K
Lead screw with clip of AF motor.
1) Apply the Grease NFH-743C to the lead screw
and clip of AF motor.
2) Apply the Grease RX-410 to the related parts
fo BARRIER ASSY.
Disassembly and reassembly
Apply Grease
3-17 3-17