Groups - Mitsubishi Electric AE-200A Instruction Book

5-2-7. Groups

Touch [Initial Settings] in the menu bar, and then touch [Groups].
Register the groups of air conditioning units to be connected to the AE-200/AE-50/EW-50, and then touch [Save
Settings].
Note: Some settings may not be accessible if logged in as a building manager.
Note: If the system is connected to a TG-2000A, make or change the settings from the TG-2000A.
Note: The [Controller] setting will appear (only on the AE-200's LCD) when the [System Exp] setting on the [Unit Info.] screen is set
to [Expand]. Switch the [Controller] setting between [AE200] and [Exp1] through [Exp4] to make settings for each AE-200,
AE-50, and EW-50 individually.
Important
● Group settings for the AE-50/EW-50 must be made with the AE-50/EW-50 properly connected to ensure proper settings.
Those settings made without the connection of AE-50/EW-50 will not be reflected.
● The units connected to AE-200 cannot be grouped together with the units connected to AE-50/EW-50.
Controller
Select [AE] to make
settings for AE-200, and
select [1], [2], [3], or [4]
to make settings for each
AE-50/EW-50.
Group No.
Group name
Unit selection
[1] Setting group names
(1) Touch the "Group name" button to display the keyboard. Enter the group name in 20 alphanumeric or symbol
characters or less.
Note: The following characters cannot be used: <, >, &, ", or '
WT07982X03
70
AHC registration
Remote controller
registration
System controller
registration
Save Settings
Touch to save the changes
made.