Mitsubishi Electric AE-200A Instruction Book page 69

[3] M-NET Settings
Note: Make the M-NET settings only on the AE-200.
(1) Switch the [Controller] setting between [AE200] and [Exp1] through [Exp4] to make settings for each AE-200,
AE-50, and EW-50 individually.
(2) Enter [0] in the [M-NET Address] field (unless otherwise specified).
(3) Select [SC/RC] to prohibit the operation from both the sub system controllers and the remote controllers.
Select [RC Only] to prohibit the operation only from the remote controllers.
WT07982X03
69