Kenwood KDC-138 Service Manual page 16

X34-56xx-xx
• CD information display mode
Key
CD mecha-
/
nism error
log display
CD Load
/ error
information
display
FM
CD Ejection
(forward
/ error
rotation)
information
AM
display
(reverse
rotation)
CD time
code error
/ count data
display
(Missing
counts)
CD time
code error
/ count data
display
(count not
updated)
■ Test mode specifi cations in TUNER source
Error is found in front-end (A1), etc. if indications below is displayed while in tuner source.
Status
Front-end (A1) E2PROM data error
Front-end (A1) communication error
Destination mismatch
• TUNER preset operation
Key
4 Preset function
16
TEST MODE (14-SEG VFD)
Description of display
M C E R R 1 : X
M C E R R 2 : X
M C E R R 3 : X
L D E R R 1 : X
L D E R R 2 : X
E J E R R 1 : X
E J E R R 2 : X
E J E R R 3 : X
E J E R R 4 : X
C N T L O S
C D D A : X
C D R O M : X
C N T S T A
C D D A : X
C D R O M : X
Display
T N E 2 P
T N C O N
T N T Y P
Description of display
F M 1 9 8 . 3
Mechanism error log 1 (Latest)
X
XX: Error number. "– –" is displayed in case there is no error.
Mechanism error log 2 (Latest)
X
XX: Error number. "– –" is displayed in case there is no error.
Mechanism error log 3 (Latest)
X
XX: Error number. "– –" is displayed in case there is no error.
Load error switch 1
X
XX: Number of errors. "– –" is displayed in case there is no error.
Load error switch 2
X
XX: Number of errors. "– –" is displayed in case there is no error.
Ejection error switch 1
X
XX: Number of errors. "– –" is displayed in case there is no error.
Ejection error switch 2
X
XX: Number of errors. "– –" is displayed in case there is no error.
Ejection error switch 3
X
XX: Number of errors. "– –" is displayed in case there is no error.
Ejection error switch 4
X
XX: Number of errors. "– –" is displayed in case there is no error.
CD time code error count data (Missing counts) mode display.
E
Number of CD-DA count errors
X
XX: Number of errors. "– –" is displayed in case there is no error.
CD-ROM (Compressed fi le) number of count errors
X
XX: Number of errors. "– –" is displayed in case there is no error.
CD time code error count data (count not updated) mode display.
Y
Number of CD-DA count errors
X
XX: Number of errors. "– –" is displayed in case there is no error.
CD-ROM (Compressed fi le) Number of count errors
X
XX: Number of errors. "– –" is displayed in case there is no error.
Front-end (A1) E2PROM is still the default (unspecifi ed) value.
N G
Communication with front-end (A1) is not possible.
N G
When destination is mismatch between front-end (A1)
N G
E2PROM and the product.
Change to 98.3MHz with the preset key [4].
A 4
Description
Description
Description