Download Print this page

Kenwood KDC-138 Service Manual page 10

Old x34-56 series
Hide thumbs Also See for KDC-138:

Advertisement

X34-56xx-xx
• K3I forced switching
Every time when [6] key is pressed in tuner FM source, switched in the following order: AUTO → Forced WIDE → Forced MIDDLE → Forced
NARROW → AUTO. Default status is AUTO, and displayed as shown below.
Key
6
K3I Forced switching
• FST adjustment mode
Perform FST soft-mute adjustment.
Key
Enter the FST adjustment mode. (Press for 1 second or longer.)
Operations in the FST adjustment mode are as follows:
Key
/
Soft-mute adjustment
Seek Stop Level
adjustment (Auto)
FM
(UP)
Seek Stop Level
AM
adjustment (Auto)
(DOWN)
/
Seek Stop Level
adjustment (Manual)
/
Seek Stop Level
adjustment (Manual)
Adjustment value
memory
Mode clear
Switch Local Seek ON or OFF by briefl y pressing [AUTO]/[TI] key when the Local Seek ON/OFF switching is allowed in the band.
After completing the FST adjustment, if you wish to clear the test mode, you can do this using the reset button.
■ Test mode specifi cations in CD source
• Procedure in CD-DA media (KTD-02A)
Key
Track up procedure
Track down procedure
1
Jump procedure
2
Jump procedure
10
TEST MODE (7-SEG LCD)
Description of display
A
9
8 . 1
3
9
8 . 1
2
9
8 . 1
1
9
8 . 1
Description of display
S
A
A
M
M
W
A
9
Description of display
AUTO (1)
Forced WIDE (2)
Forced MIDDLE (3)
Forced NARROW (4)
Note
0 ↔ 7
D
F
0.00 (V) ↔ 5.00 (V). Normal (Local OFF)
T
n
0.00 (V) ↔ 5.00 (V). Normal (Local ON)
T
L
0.00 (V) ↔ 5.00 (V). Normal (Local OFF)
N
n
0.00 (V) ↔ 5.00 (V). Normal (Local ON)
N
L
Displays the data that has been written in the E2PROM
R
T
when pressing the key for 2 seconds or longer.
Clear the FST adjustment mode. (Returns to normal
8 . 3
display and the test mode is retained.)
Every time pressed, jumps to the track shown below.
No.9 → No.15 → No.10 → No.11 → No.12 → No.13 → No.22 →
No.14 → No.9 (recursive)
or less, playback starts with track No.1.
Goes down by 1 track from the currently played track.
Jump to No. 28 (Scratch 0.7mm for MUSIC line vibration testing)
Jump to No. 14 (Blurring surface disc TCD-731RA Tr14)
Description
Description
Description
But in case the disc has 8 tracks

Advertisement

loading