Canon w-e1 Instruction Manual page 46

Connecting to a Detected Network Manually
(1)
(1) SSID
(2) An icon is displayed if the access point is encrypted
(3) Channel used
[Refresh] and [Manual settings]
Scroll down the screen in step 4 to display [Refresh] and [Manual

settings].
To search for access points again, select [Refresh].

To configure settings for the access point manually, select [Manual

settings]. Enter the SSID using the virtual keyboard and then
configure settings following the instructions displayed.
For [Camera access point mode] displayed in step 4, see page 50.
46
Select an access point.
4
(2) (3)

Use <9> to select the access point
to connect to from the list of access
points.