Canon w-e1 Instruction Manual page 38

Connecting via WPS (PBC Mode)
For [Camera access point mode] displayed in step 4, see page 50.
38
Select [Connect with WPS].
4
Select [WPS (PBC mode)].
5
Select [OK] and press <0> to go to

the next screen.
Connect to the access point.
6
Press the access point's WPS button.

For details about where the button is
located and how long to press it, refer
to the access point's instruction
manual.
Select [OK] and press <0> to

establish a connection with the
access point.
 When a connection with the access
point is established, the next screen
is displayed.