Access Point - Canon w-e1 Instruction Manual

Connecting via WPS (PIN Mode)
For [Camera access point mode] displayed in step 4, see page 50.
42
Select [Connect with WPS].
4
Select [WPS (PIN mode)].
5
Select [OK] and press <0> to go to

the next screen.
Specify the PIN code at the
6

access point.

At the access point, specify the 8-digit

PIN code displayed on the camera's
LCD monitor.
For instructions on setting PIN codes

at the access point, refer to the
access point's instruction manual.
After the PIN code is specified, select

[OK] and press <0>.