Parameters/Address Space; Parameters - Siemens Simatic ET 200SP Manual

Parameters/address space

4.1

Parameters

Parameters for DQ 16x24VDC/0.5A ST
The effective range of the configurable parameters depends on the type of configuration.
The following configurations are possible:
● Central operation with an ET 200SP CPU
● Distributed operation on PROFINET IO in an ET 200SP system
● Distributed operation on PROFIBUS DP in an ET 200SP system
When assigning parameters in the user program, use the "WRREC" instruction to transfer
the parameters to the module using the data records; refer to section Parameter assignment
and structure of parameter data record (Page 27).
The following parameter settings are possible:
Table 4- 1 Configurable parameters and their defaults (GSD file)
Parameters
Diagnostics:
No supply voltage L+
Diagnostics:
Short-circuit to ground
Diagnostics:
Short-circuit to L+
Diagnostics:
Wire break
Channel activated
Digital output module DQ 16x24VDC/0.5A ST (6ES7132-6BH00-0BA0)
Manual, 12/2015, A5E03574420-AC
Range of values
Enable
•
Disable
•
Enable
•
Disable
•
Enable
•
Disable
•
Enable
•
Disable
•
Enable
•
Disable
•
Default Parameter
reassignment
in RUN
Disable Yes
Disable Yes
Disable Yes
Disable Yes
Enable Yes
Effective range with configuration
software, e.g. STEP 7
(TIA Portal)
GSD file GSD file
PROFINET IO PROFIBUS DP
Module Module
Module Module
Module Module
Module Module
Channel Channel
4
1
13