Toshiba e-STUDIO5540C Software Installation Manual page 32

2 RECOMMENDED INSTALLATION
[SNMP Settings]
If the SNMP settings are not the same in your TOSHIBA MFP and the [SNMP Settings] dialog box, you
cannot find your TOSHIBA MFP. Verify the correct SNMP settings on the [SNMP Settings] dialog box
and change the settings, if needed.
Ask the administrator for details on the SNMP settings configured for your TOSHIBA MFP.
When SNMP V1 and V2 are used
1. Click [V1/V2] if a community name other than "private"
(default) is set for the SNMP community name for your
TOSHIBA MFP.
2. Change the SNMP community name.
3. Click [OK].
When you change the SNMP community name, see the
following page:
 P.33 "Precautions for Changing the SNMP Settings"
When SNMP V3 is used
1. Click [V3].
2. When a user ID file is used for authentication, click
[Browse] to specify the file.
When user authentication information is used for
authentication, click [User Name/Password] to enter
the necessary information.
 Consult the administrator for preliminary advice on
how to authenticate users.
 When you change the SNMP settings, see the
following page:
 P.33 "Precautions for Changing the SNMP
Settings"
3. Click [OK].
* When SNMP V1, V2, and V3 are configured for your TOSHIBA MFP, perform both of the above settings.
30 Procedure for Recommended Installation