Toshiba e-STUDIO5540C Software Installation Manual page 194

5 INSTALLING PRINTER DRIVERS FOR UNIX/Linux
Color Settings 4 (For Color MFPs)
Option Value
Background
Adjustment
Brightness
Contrast
Saturation
Sharpness
Use Sharpness
Filter
[Continue] button
Finishing
Option Value
Destination Printer's Default
Exit Tray
Tray 1
Tray 2
Upper Exit Tray
Side Exit Tray
Job Separator Upper
Job Separator Lower
Folding Off, On
Hole Punch Off
Long Edge Punch without rotation
Short Edge Punch without rotation
Long Edge Punch with 180 degree
rotation
Short Edge Punch with 180 degree
rotation
Stapling Off
Upper Left (Portrait)/Upper Right
(Landscape)
Middle Left (Portrait)/Middle Top
(Landscape)
Lower Left (Portrait)/Upper Left
(Landscape)
Upper Right (Portrait)/Lower Right
(Landscape)
Middle Right (Portrait)/Middle Bottom
(Landscape)
Lower Right (Portrait)/Lower Left
(Landscape)
Middle Top (Portrait)/Middle Right
(Landscape)
Middle Bottom (Portrait)/Middle Left
(Landscape)
Saddle Stitch (Portrait)/Saddle Stitch
(Landscape)
[Continue] Determines the selected items.
button
192 Setting Up the CUPS
Alternative Value
-4, -3, -2, -1, 0, 1, 2, 3, 4
-4, -3, -2, -1, 0, 1, 2, 3, 4
-4, -3, -2, -1, 0, 1, 2, 3, 4
-4, -3, -2, -1, 0, 1, 2, 3, 4
-4, -3, -2, -1, 0, 1, 2, 3, 4
Off, On
Determines the selected items.
Alternative Value
Description
Select the density level of the background.
Select the brightness.
Select the contrast.
Select the saturation.
Select the sharpness.
Selecting this option allows you to adjust the
sharpness for printing.
Description
Select a destination.
The destinations that you can choose vary
depending on the model and the installed
options.
Select whether the Folding feature is enabled or
not.
Select the hole punch option.
Select whether a print job is stapled or its
locations.
"Saddle Stitch (Portrait)/Saddle Stitch
(Landscape)" can be selected only when the
Saddle Stitch Finisher is installed.