Appendix; Restoring Default Parameters; Eldes Configuration Tool Software; Esim120 Control By Gprs - Eldes ESIM120 User Manual

3. Appendix

3.1 Restoring Default Parameters

To restore the default parameters:
1. Disconnect power supply and USB cable.
2. Short circuit (connect) D1 and D2 pins.
3. Power up ESIM210 for 7 seconds.
4. Disconnect power supply.
5. Remove short circuit from D1 and D2 pins.
6. Power up ESIM210.
7. Parameters reset to default.

3.2 Eldes Configuration Tool software

To configure the system quicker and easier as well as to use more system capabilities, please install configuration software ELDES
Configura tion Tool which can be downloaded from ELDES website at www.eldes.lt
Before connecting USB cable to the computer, please, read ELDES Configuration Tool user guide available in the HELP section of the
software.

3.3 ESIM120 control by GPRS

3.3.1 How to connect to ESIM120 through www.eldes.lt website
In order to connect to ESIM120 using your web browser, ensure the following conditions:
• ESIM120 is with a SIM card placed in it.
• Power supply is connected.
• The default 4-digit password is changed to a new one and your mobile number is uploaded as
administrator mobile number.
• The device isn"t connected to computer with USB cable.
Activate GPRS connection between ESIM120 and the server.
Use default settings*1 to connect to ESIM120 through www.eldes.lt website. If default settings is
changed, set ESIM120 to work in Client mode and make sure that GPRS server parameters is set to
default. To select Client mode send SMS message with the following text:
XXXX_setgprs:type:client
Activate GPRS connection using standart or one-time GPRS parameters*:
To use standart GPRS parameters, send SMS message with the following text:
XXXX_connect:profile1
Here "profile1" is the default name of your standard GPRS parameters. By default, ESIM120 connects
to ELDES server and establishes a 20 minutes-long session.
To use one-time GPRS parameters, for example send SMS message with the following text*
XXXX_connect:timeout:MM
Here "MM" – time duration in minutes. In the example above, ESIM120 will connect to
ELDES server and session will be activated for MM minutes.
The system generates and sends login details to your mobile telephone.
Open www.eldes.lt/login webpage in your web browser and login with received username and password.
MANUAL ELDES ESIM120 V1.0
1111 setg
ESIM 120
prs:type:
client
1111 conn
ESIM 120
ect:profil
e1
:
1
1111 conn
ESIM 120
ect:timeo
ut:25
23