Call Monitor - Panasonic KX-TDA100 Features Manual

1.7 Busy Line/Busy Party Features
1.7.3

Call Monitor

Description
Allows an extension user to listen to the busy extension user's existing conversation. The user
can hear the conversation, but the user's voice is not heard. If desired, interrupting the call to
establish a three-party conference call is available.
Conditions
• COS programming determines extension users who can use this feature.
• This feature is available only when the busy extension is in a conversation with another
extension or outside party.
• This feature does not work when the busy extension is in one of the following conditions:
a)
Executive Busy Override Deny (
Security (
b)
While receiving OHCA (
OHCA (
c)
During a Conference call (
d)
During a doorphone call (
e)
While Live Call Screening (LCS) or Two-way Record is activated (
DPT (Digital) Integration).
f)
During Consultation Hold.
(Consultation Hold: Allows an extension user to place a call on hold temporarily to
perform Call Transfer, Conference, or Call Splitting.)
• This feature stops when the busy extension user presses the following buttons during a
conversation (
– FLASH/RECALL button
– HOLD button
– TRANSFER button
– CONF (Conference) button
– DSS button
– EFA button
– Two-way Record button
– Two-way Transfer button
– One-touch Two-way Transfer button
– Voice Mail (VM) Transfer button
User Manual References
User Manual
1.2.4 When the Dialled Line is Busy or There is No Answer
96 Feature Guide
1.10.5 Data Line Security) has been set.
1.7.4.3 Off-hook Call Announcement (OHCA)) or Whisper
1.7.4.4 Whisper OHCA).
1.13.1 Conference Features).
1.16.1 Doorphone Call).
1.19.1 Fixed Buttons and 1.19.2 Flexible Buttons):
1.7.2 Executive Busy Override) or Data Line
1.23.3 Voice Mail