Panasonic KX-TDA100 Features Manual page 114

1.9 Automatic Route Selection (ARS) Features
[Programming Procedures]
1.
ARS Mode
It is possible to select whether ARS operates when an extension user makes a call using
any Idle Line Access method or when an extension user makes a call using any Trunk
Access method. (
2.
Leading Number Exception Table
Store the telephone numbers that will avoid using the ARS feature.
2
Location
001
002
:
*1 :
3.
Leading Number Table
Store the area codes and/or telephone numbers as leading number that will be routed by
the ARS feature. In this table, the Routing Plan (refer to "4. Routing Plan Table
Assignment") is selected for each number.
The additional (remain) number of digits must be assigned only when "#", for example, is
needed after a dialled number. The "#" is added after the assigned number of digits of
dialled number (excluding a leading number).
3
Location
*1 :
*2 :
If a dialled number matches a leading number, the number will be modified according to
the corresponding Routing Plan Table and the modified number will be sent to the trunk
when the assigned additional (remain) number of digits are dialled.
If a dialled number matches multiple leading number entries, the leading number entry
with the lowest numbered location will have priority.
114 Feature Guide
Assignment (
1
1.5.5.3 Trunk Access)
ARS Leading Number Exception Table
Leading No.
No. Exception
033555
06456
:
ARS Exception Number [325]
3 Assignment
ARS Leading Number Table
Leading Additional (Remain)
*1
No. No.
0001
039
0002
03
0003
0444
:
:
ARS Leading Number [321]
ARS Routing Plan Table Number [322]
ARS Mode [320])
2 Assignment
*1
Routing Plan
No. of Digits Table No.
7
0
5
:
*2
1
4
5
:
4