Table 3-9 Hicom 150 E Officepro - Board Power Requirements - Siemens Hicom 150 E Office Service Manual

Hicom 150 E Office Rel.1.0 Service Manual - 3.2 Central boards
existing boards. The power requirements of the connected terminals (determined by means of
3-13) are then added to this figure.
Battery current drain of the terminals
Figure 3-13 Hicom 150 E OfficePro - battery current drain of terminals
Formula for calculating battery power requirements
The bridging time is determined on the basis of
The cabinet with the greatest load determines the overall system bridging time when
calculations are made in relation to a multi-cabinet system.
Any external loads (e.g. NT 1) that are fed by the USVI must be accessed at 0.04 A per watt
of the consumer.
Table 3-9 Hicom 150 E OfficePro -
board power requirements
Board
CBMOD -Q2960-
SLA16 -Q2702-
SLMC8 -Q2911-
SLMO24 -Q2901-
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_31.htm (18 of 20) [06/04/2000 13:03:01]
Power
requirements
0.80 A
0.10 A
0.10 A
0.08 A
Figure 3-12.
Figure