Start-Up; Hicom 150 E Officepro Start-Up; Start-Up Procedure; Supplying The System With Power - Siemens Hicom 150 E Office Service Manual

Hicom 150 E Office Rel.1.0 Service Manual - 5 Start-up

5 Start-up

5.1 Hicom 150 E OfficePro start-up

5.1.1 Overview
Chapter contents
This chapter contains information on how to start up the Hicom 150 E OfficePro communication
system.
Danger
Only authorized service personnel should carry out the system start-up.

5.1.2 Start-up procedure

Table 5-1 Hicom 150 E OfficePro - start-up procedure
Step
1.
(Plugging in the power cable of the power supply unit(s) -> starting the system
2.
3.
4.
5.

5.1.3 Supplying the system with power

Procedure
Step
1. Plug in the power cable of the power supply unit(s).
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_5m.htm (1 of 7) [06/04/2000 13:06:35]
Start-up activity (notes)
Supplying the system with power
Carrying out the country initialisation
Entering the route tel. number
Performing customer-specific system programming
Carrying out a quick check
boot)
Action
page 5-2
page 5-7
page 5-9
page 5-10
page 5-10