Changing Login Password; Management For System Account; Creating System Account - Dasan V5824G User Manual

User Manual
V5824G
4.1.3
!
4.1.4
4.1.4.1
i
To disable password encryption, use the following command.
Command
no service password-encryption

Changing Login Password

To configure a password for created account, use the following command.
Command
passwd [NAME]
The following is an example of changing the current password.
SWITCH(config)# passwd
Changing password for admin
Enter the new password (minimum of 5, maximum of 8 characters)
Please use a combination of upper and lower case letters and numbers.
Enter new password:junior95
Re-enter new password:junior95
Password changed.
SWITCH(config)#
The password you are entering will not be shown in the screen, so please be careful not
to make a mistake.

Management for System Account

Creating System Account

For the V5824G, the administrator can create a system account. In addition, it is possible
to set the security level from 0 to 15 to enhance the system security.
To create a system account, use the following command.
Command
user add NAME DESCRIPTION
user add NAME level <0-15>
DESCRIPTION
The account of level 0 to level 14 without any configuring authority only can use exit and
help in Privileged EXEC View mode and cannot access to Privileged EXEC Enable mode.
The account with the highest level 15 has a read-write authority.
Mode
Global Disables password encryption.
Mode
Global Configures a password for created account.
Mode
Creates a system account.
Global
Creates a system account with a security level.
UMN:CLI
Description
Description
Description
51