Olt Bit Error Ratio (Ber); Ploam Message - Dasan V5824G User Manual

UMN:CLI
11.1.18

OLT Bit Error Ratio (BER)

You can configure the monitor direction and the alarm threshold of the bit error ratio. The
system generates a bit error ratio (BER) alarm when the total number of error bits or bit
error rate of the data transferred between the OLT and ONUs exceeds the alarm
threshold. Both uplink and downlink data between OLT and ONU can be monitored.
To configure the OLT Bit Error Ratio (BER), use the following command.
To display the information of OLT Bit Error Ratio (BER), use the following command.
11.1.19

PLOAM Message

To send a physical layer OAM (PLOAM) message to a specific ONU ID for debugging,
use the following command.
484
Command
olt ber ds-interval <1000-10000>
[olt ber sd-threshold <4-9>] [olt
ber sf-threshold <3-8>] [olt ber
us-interval <1000-10000>]
olt ber us-interval <1000-10000>
[olt ber ds-interval
10000>] [olt ber sd-threshold <4-
9>] [olt ber sf-threshold <3-8>]
olt ber sd-threshold <4-9> [olt
ber ds-interval <1000-10000>]
[olt ber us-interval
10000>] [olt ber sf-threshold <3-
8>]
olt ber sf-threshold <3-8> [olt
ber ds-interval <1000-10000>]
[olt ber us-interval
10000>] [olt ber sd-threshold <4-
9>]
Command
show olt ber [OLT-ID]
show olt ber
Command
olt specific-ploamONU-ID
MSG_ID DATA
Mode
Specifies the monitor direction and interval of the bit
error ratio.
ds-interval: Downstream BER interval from OLT to
ONU
us-interval: Upstream BER interval from ONU to OLT
1000-10000: downstream BER interval value (default:
<1000-
5000ms)
1000-10000: upstream BER interval value (default:
2000ms)
GPON-OLT
<1000-
Sets the threshold for reporting of signal degrade (SD)
BER or signal fail (SF) BER alarms.
4-9: SD threshold value (default: 8)
3-8: SF threshold value (default: 7)
<1000-
Mode
Shows OLT's Bit Error Ratio (BER) configuration
GPON
(including upstream/downstream BER interval and
GPON-OLT
threshold).
Mode
Sends the PLOAM message to a specific ONU ID for
ONU-ID: ONU ID number used in PLOAM messages
(1-255)
GPON-OLT
MSG_ID: Downstream PLOAM message ID value or
private PLOAM ID defined by the G.984.3 (1-255)
DATA: 10 bytes HEX
User Manual
V5824G
Description
Description
Description