Changing The Program Timer; Set The “Hour”; Set The “Minute” - Sanyo RCS-TM80BG Instruction Manual

• Changing the Program Timer

To change the program setting, follow the steps below.
1. Select the program you want to change in the
program confirmation mode, and press
enters the setting mode of the program currently
displayed.
* In the program setting mode,
"minute" and "item" flash on the display.
2. Set the "hour". (program step 1)
Press / to set the "hour".
Confirm the "hour" and press
mode (setting of the "minute").
3. Set the "minute". (program step 2)
Press / to set the "minute".
Confirm the "minute" and press
pattern selection mode).
. The
, "hour",
. The enters the program changing
.The unit enters
normal remote controller
PROGRAM CANCEL
SET
Program
CANCEL,DEL
program check
CANCEL,DEL
SET,CANCEL,DEL
PROGRAM
CANCEL
SET,CANCEL
EG-7
2,3,4 1,2,3,4 4
Program step1
Program step2
(the program
Changing hour digits
SET
Changing minute digits
SET
Changing patterns
Selecting copy source
SET
Selecting copy destination
EG