Setting The Outing Function; Canceling The Outing Function; Outing Function Indication - Sanyo RCS-TM80BG Instruction Manual

• Setting the Outing Function

1. Press and hold for 2 seconds to display the upper limit temperature
setting screen.
, and the upper limit temperature start flashing.
(The default value of the upper limit temperature is 38 °C.)
2. Press /
fix the value. The lower limit temperature setting screen is displayed.
3. Press /
fix the value. The outing function setting is completed. (The default value of
the lower limit temperature is 10 °C.)

• Canceling the outing function

Press and hold for 2 seconds while the outing function is set.

• Outing function indication

Outing function
indication
Off The outing function is not set.
Flashing The outing function is now being set, or under operation.
Lighting Although the outing function is set, not under operation.
Note
A remote controller loses outing function operation information when it is cut for more than one hour
during the outing function operation by electricity. It reverts from the blackout, and an air conditioner
does not drive in outing function when operation is started. At this time, an air conditioner does not stop
at outing function.
to select the upper limit temperature and press
to select the lower limit temperature, and press
EG-13
to
to
Status
2
3
EG