Table of Contents
Advertisement
7.5.3.22 SETΔIPX_RTP_PORT_NO
This command is used to assign the base port number that is used for RTP at IPX LAN side. Pressing the
Enter key can skip the item. In this case, default values are assigned automatically. To make this assignment
effective, it is required to execute the "REBOOT" command to restart the MG-SIP16.
Note: The value must be assigned by an even number.
7.5.3.23 SETΔKEYNUMBER
The command is used to assign a Trunk Group pilot number of MG-SIP16 for registration. Pressing the Enter key
can skip the item. In this case, default values are assigned automatically. To make this assignment effective, it is
required to execute the "REBOOT" command to restart the MG-SIP16.
Note: Be sure not to enter a space after the key number.
7.5.3.24 SETΔMULTI_REGIST
This command is used to enable/disable the setting of registration to SIP server per number. Pressing the
Enter key can skip the item. In this case, default values are assigned automatically. To make this assignment
effective, it is required to execute the "REBOOT" command to restart the MG-SIP16.
Note 1: When "Privacy" is selected, assign a random value to the User ID field of SIP message "Contact
header". When "SIP-URI" is selected, assign the SIP-URI to the User ID field of SIP message "Contact header".
Assign the telephone number if SIP-URI has not been assigned.
Note 2: Use configuration command "setΔsip_register" to assign the SIP server for register destination. The
assignment of "setΔsip_register" is necessary when registration is to be done per number. Assign this command
adjusting to the specifications on SIP network.
MG-SIP
Page 42 of 75
5/8/2009
Hide quick links:
Advertisement
Table of Contents
