Setδdomain; Setδdrsaddress; Setδdrs_Qos - NEC MG-SIP Configuration Manual

7.5.3.12 SETΔDOMAIN
This command is used to specify the domain of MG-SIP16. Pressing the Enter key can skip the item. In this case,
default values are assigned automatically. To make this assignment effective, it is required to execute the "REBOOT"
command to restart the MG-SIP16.
7.5.3.13 SETΔDRSADDRESS
This command is used to assign MGC (DRS) address to MG-SIP16. Pressing the Enter key can skip the item. In this
case, default values are assigned automatically. To make this assignment effective, it is required to execute the
"REBOOT" command to restart the MG-SIP16.
Note: unit(0), unit(1), unit(2), and unit(3) represent primary, secondary, tertiary, and fourthly respectively.
7.5.3.14 SETΔDRS_QOS
This command is used to specify the Quality of Service (QoS) of DRS. Pressing the Enter key can skip the item. In
this case, default values are assigned automatically. To make this assignment effective, it is required to execute the
"REBOOT" command to restart the MG-SIP16.
•
When IP PRECEDENCE (=1) is selected:
MG-SIP Page 33 of 75 5/8/2009