Setδh245_Base_Port_No - NEC MG-SIP Configuration Manual

•
When Negotiation is selected:
•
When Out-Band is selected:
•
When In-Band is selected:
Note: Note that the sum of DTMF Duration and DTMF Pause values must be specified more than 120ms. If not,
the following error message is displayed.
7.5.3.16 SETΔH245_BASE_PORT_NO
This command is used to specify the H.245 port number to/from IPX network. Pressing the Enter key can skip the
item. In this case, default values are assigned automatically. To make this assignment effective, it is required to
execute the "REBOOT" command to restart the MG-SIP16.
MG-SIP Page 35 of 75 5/8/2009