Setting Up The Agilent 2100 Bioanalyzer - Agilent Technologies 2100 Installation And Safety Manual

Setting up the Agilent 2100 Bioanalyzer

To set-up the Agilent 2100 Bioanalyzer instrument:
1 Locate bench space that meets the requirements described in
2 Place the instrument on the bench in an upright position.
3 Open the lid of the bioanalyzer and pull the metal lever on the inside left of
Damage by electrostatic discharge
C A U T I O N
The heater plate and electrodes are sensitive to electrostatic discharge.
➔
space" on page 17.
the lid to the vertical position. Remove the shipment lock and store it for
future use.
Make sure that you are grounded before inserting a chip to prevent the Agilent 2100
Bioanalyzer from being damaged by electrostatic discharge. The lid is grounded to
leak off electrostatic energy of the operator.
Installing the Agilent 2100 Bioanalyzer System
Setting up the Agilent 2100 Bioanalyzer
4
"Bench
27