Ethernet (M.5.9); Common Settings (M5.9.1) - Siemens bt300 Operator's Manual

Chapter 4 - Parameters and Menu Structure
I/O and Hardware (M5)

Ethernet (M.5.9)

Ethernet settings are used to define and configure the fieldbus protocol. The wiring is the same for all Ethernet
protocol, as shown below.

Common Settings (M5.9.1)

Structure Parameter
P5.9.1.1 IP Address Mode
P5.9.1.2 Fixed IP
P5.9.1.3 IP Address
P5.9.1.4 Subnet Mask
P5.9.1.5 Default Gateway
P5.9.1.6 MAC Address
152 | 180
Siemens Industry, Inc.
Building Technologies
Figure 36: Etherenet Connection.
Table 127: Ethernet Common Settings (M5.9.1).
Min Max
DHCP with AutoIP
Siemens BT300 HVAC Drive
Unit Default
Fixed IP DHCP with AutoIP
ID Description
2482 Defines the IP addressing
mode as follows:
0 = Fixed IP
1 = DHCP with AutoIP
See below.
2483 Displays the actual IP
Address in use.
2484 Displays the actual subnet
mask in use.
2485 Displays the actual default
gateway in use.
2486 Displays the Ethernet card's
MAC address.
DPD01809
2016-06-07