GE D30 Instruction Manual page 99
Line distance protection system
Hide thumbs
Also See for D30:
- Instruction manual (686 pages) ,
- Communications manual (532 pages) ,
- Instruction manual (646 pages)
Table of Contents
Advertisement
CHAPTER 3: INSTALLATION
3.
Click the Quick Connect button to open the window.
4.
Select the Ethernet interface and enter the IP address assigned to the D30, then click the Connect button. The
EnerVista UR Setup software creates a site named "Quick Connect" with a corresponding device also named "Quick
Connect" and displays them on the left side of the screen.
5.
Expand the sections to view data directly from the D30 device.
Each time that the EnerVista UR Setup software is initialized, click the Quick Connect button to establish direct
communications to the D30. This ensures that configuration of the EnerVista UR Setup software matches the D30 model
number.
When direct communications with the D30 via Ethernet is complete, make the following changes:
1.
From the Windows desktop, right-click the My Network Places icon and select Properties to open the network
connections window.
2.
Right-click the Local Area Connection icon and select the Properties item.
3.
Select the Internet Protocol (TCP/IP) item from the list provided and click the Properties button.
4.
Set the computer to "Obtain a relay address automatically" as shown.
If the computer is used to connect to the Internet, re-enable any proxy server settings after the computer has been
disconnected from the D30 relay.
D30 LINE DISTANCE PROTECTION SYSTEM – INSTRUCTION MANUAL
CONNECT TO THE D30
3-53
3
Advertisement
Table of Contents
