Configure The D30 For Software Access - GE D30 Instruction Manual
Line distance protection system
Hide thumbs
Also See for D30:
- Instruction manual (686 pages) ,
- Communications manual (532 pages) ,
- Communications manual (526 pages)
Table of Contents
Advertisement
CONFIGURE THE D30 FOR SOFTWARE ACCESS
3
6.
Select the complete path, including the new directory name, where the EnerVista UR Setup software is to be installed.
7.
Click the Next button to begin the installation. The files are installed in the directory indicated, and the installation
program automatically creates icons and adds an entry to the Windows start menu.
8.
Click Finish to complete the installation. The UR device is added to the list of installed intelligent electronic devices
(IEDs) in the EnerVista Launchpad window, as shown.
3.7 Configure the D30 for software access
You connect remotely to the D30 through the rear RS485 or Ethernet port with a computer running the EnerVista UR Setup
software. The D30 also can be accessed locally with a computer through the front panel RS232 port or the rear Ethernet
port using the Quick Connect feature.
•
To configure the D30 for remote access via the rear RS485 port, see the next section.
•
To configure the D30 for remote access via the rear Ethernet port, see the Configure Ethernet Communication section.
•
To configure the D30 for local access with a computer through either the front RS232 port or rear Ethernet port, see
the Connect to the D30 section.
•
To discover automatically UR devices and configure the software for them, see the Automatic Discovery of UR Devices
section.
3-44
Figure 3-53: Identifying the UR device type
Figure 3-54: UR device added to Launchpad window
D30 LINE DISTANCE PROTECTION SYSTEM – INSTRUCTION MANUAL
CHAPTER 3: INSTALLATION
Advertisement
Table of Contents
