Table of Contents
Advertisement
SPECIAL FEATURES
Channel Mapping
Select ON for automatic channel mapping functions. The Channel Mapping feature
allows the STB to match the actual DTV broadcast channel (assigned to your local TV
station) to the channel number that the station uses to identify itself. For example,
local channel 4 may actually be broadcasting digital programming on channel 60. The
STB will automatically tune to channel 60 and the readout will display as channel 4.
The user must input channel 4 in order to receive this channel.
Select OFF if you experience difficulty in receiving some digital TV stations. In this
case, the STB will display the actual DTV broadcast channel number assigned by the
FCC (Federal
Communications
Commission).
Using the example
above,
local
channel 4 may be broadcasting
digital programming on 60. The STB will tune to
channel 60 and the readout will display channel 60. The user must input channel 60
in order to receive this channel,
Note:
In order for the Channel Mapping function to work properly, Auto Programming must
be performed after selecting Channel Mapping ON or OFF.
Procedure
[]
Press the MENU button on the remote control to display the Roller Guide Menu.
[]
Press A•
arrows to rotate the Roller Guide.
O
Select SET UP in Roller Guide Menu.
[]
Press the ACTION button to display the main menu items.
OI
Press the • arrow, then press the • arrow to select CH Map.
O
Press the •
arrow,
[]
Press A•
arrows to select ON or OFF.
[]
Press the ACTION button to enter your selection,
[]
Press MENU button to exit the Roller Guide Menu.
SET UP
SOURCE
ANTENNA
CH MAP
ON
[]
Advertisement
Table of Contents
