Table of Contents
Advertisement
GETTING
STARTED
Step 8. Programming
Available
Channels
YOU
MUST
PERFORM
THE
AUTOMATIC
CHANNEL
PROGRAMMING
BEFORE
MANUALLY
ADDING
AND
DELETING
CHANNELS
BECAUSE
OF THE
DIGITAL
TUNING
SYSTEM
USED
BY THE
STB.
THIS
METHOD
WILL
ENSURE
THAT
EVERY AVAILABLE
CHANNEL
IS CAPTURED
AND STORED
INTO MEMORY.
Automatic
Channel
Programming
The STB will scan for all available
channels
and store them in memory.
The scan will
normally
take several
minutes
to complete.
Procedure
C3
In SET UP Menu, select PROGRAM to choose AUTO to automatically scan and store all
channels with a signal.
£3
Press the • arrow to select AUTO.
O
Press the ACTION button to start the auto scan.
O
Press the ACTION button to cancel the auto scan or exit back to SET UP Menu after the
auto scan is complete.
[3
Press the •
arrow once to exit back to Roller Guide.
Note:
As
more
digital
channels
become
available
in your
area,
the AUTO
feature must be selected
to store
the new digital channels
into memory.
Manual
Channel
Programming
After
programming
all available
channels,
you can
use the
MANUAL
feature
to
selectively
add or delete channels.
Procedure
O
In SET UP Menu, select PROGRAM to choose MANUAL to manually add or delete
channels.
£3
Press the • arrow twice to select MANUAL.
O
Press the ACTION button to edit channels.
Use the A, _ arrow buttons and numeric keypad to select a channel.
Use the 4 and • arrowbuttons to delete or add channels.
£3
Press the ACTION button to exit back to SET UP Menu.
O
Press the •
arrow once to exit back to Roller Guide.
AUTO
MANUAL
._'_ J/Ff
Automatic
Channel
Programming
The AUTO feature must be selected first to ensure that all
available channels are captured and stored into memory.
[]
Advertisement
Table of Contents
