Table of Contents
Advertisement
The Power-PRO™ XT ambulance cot requires regular maintenance. Establish and follow a maintenance schedule and
keep records of maintenance activity (see page 65 for a form).
WaRNING
•
Do not modify the Power-PRO™ XT ambulance cot or any components of the cot, including the hydraulic unit.
Modifying the product can cause unpredictable operation resulting in injury to the patient or operator. Modifying
the product will also void its warranty.
•
Es
caping fluid under pressure can penetrate the skin causing serious injury. Avoid the hazard by relieving
pressure before disconnecting hydraulic or other lines. Tighten all connections before applying pressure. If an
accident occurs, see a doctor immediately. Any fluid injected into the skin must be surgically removed within a
few hours or gangrene may result. Doctors unfamiliar with this type of injury should reference a knowledgeable
medical source.
When using maintenance products, follow the directions of the manufacturer and reference all material safety data
sheets.
CaUTION
•
Improper maintenance can cause injury or damage to the product. Maintain the ambulance cot as described
in this manual. Use only Stryker approved parts and maintenance procedures. Using unapproved parts and
procedures could cause unpredictable operation and/or injury and will void the product warranty.
•
Failure
to use authorized parts, lubricants, etc. could cause damage to the ambulance cot and will void the
warranty of the product.
•
H
ydraulic lines, hoses, and connections can fail or loosen due to physical damage, kinks, age, and exposure.
Check hoses and lines regularly to avoid damage to the cot. Check and tighten loose connections.
•
Do
not tip the ambulance cot onto its load wheels and actuate the product as this will allow air to enter the
hydraulic system.
Return To Table of Contents
60
Preventative Maintenance
6500-309-001 REV A
www.stryker.com
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the Power-PRO XT 6500 and is the answer not in the manual?
Questions and answers
Como inyectarle aceite hidráulico a la camilla? Mi camilla Stryker 6500, al parecer necesita cambio de aceite. Últimamente no sube ni baja presionando + o - . Lo hace muy esporádicamente. De ahí deduZco UE le falta aceite hidráulico.
To inject hydraulic oil into the Stryker Power-PRO XT 6500 stretcher, follow these steps:
1. Raise the cot to the full up position.
2. Ensure the fill port is horizontal and aligned with the hole in the motor mount.
3. Remove the port plug using a 3/16" Allen wrench.
4. Fill the reservoir up to the bottom of the fill port using Mobil Mercon® V Synthetic Blend Oil (6500-001-293).
5. Replace the plug and run the cot up and down a few times to circulate the oil.
This ensures proper hydraulic function.
This answer is automatically generated