Samsung galaxy note 3 User Manual page 151

3. Enter the Network SSID. This is the name of your
Wireless Access Point.
4. Tap the Security field and select a security option. This
must match the current security setting on your target
WAP.
5. If secured, you will also need to enter your WAP's
password.
6. Tap Show advanced options, if you need to add
advanced options such as Proxy settings, IP settings, or
Key management.
7. Tap CONNECT to store the new information and connect
to your target WAP.
Note: The next time your device connects to a previously
accessed or secured wireless network, you are not
prompted to enter the WAP key again, unless you reset
your device back to its factory default settings.
Turning Wi-Fi Off
1. From the Home screen, tap
CONNECTIONS Wi-Fi.
2. Tap the ON/OFF slider, located to the right of the Wi-Fi
field, to turn Wi-Fi OFF
Note: Use of wireless data connections such as Wi-Fi and
Bluetooth can cause an added drain to your battery and
reduce your use times.
Wi-Fi Status Indicators
The following icons show your Wi-Fi connection status at a
glance:
Displays when Wi-Fi is connected, active, and
communicating with a Wireless Access Point
(WAP).
Displays when there is a Wi-Fi access point
available but you are not connected to it. May also
display if there is a communication issue with the
target Wireless Access Point (WAP).
Displays when connected to another device using
Wi-Fi Direct. For more information, refer to "Wi-Fi
Direct" on page 142.
Settings 
.
Connections 141