Table of Contents
Advertisement
Section 700 - Operation
3. Press the HOLD key.
4. Press the HOLD key.
5. Press the HOLD key.
6. Dial the extension number.
7. Press the HOLD key.
8. Enter the PSD bin number (80-99).
9. Press the HOLD key.
10. Enter the PSD digits to be dialed.
Note: To clear an entry or existing data, press the FLASH
key.
11. Press the HOLD key to store the entry.
12. To set additional PSD numbers, press the volume up and
down key or press the HOLD key to move to the desired
PSD bin number.
13. Repeat steps 10-12 until all PSD numbers are entered.
14. To return to the top menu level (81), press the PROG key.
OR...
To exit the User Maintenance mode, press the ON/OFF
key.
Hardware Requirements
•
N/A
Related Programming
•
N/A
Considerations
•
N/A
Set Personal Speed Dial Names
Description
For a description of Personal Speed Dial (PSD), see "Personal Speed Dial" on page 179 for a Digital
Key Telephone, "Personal Speed Dial" on page 238 for a Digital Single Line Telephone (DSLT), and
"Personal Speed Dial" on page 282 for a Single Line Telephone (SLT).
576-13-700
Action
DBS 576 (USA), Revised 6/11/98
Chapter 4. User Maintenance
Result
8101-
PSD Assignment displays
0
:
PSD Number displays
EXT Number displays
Enter PSD # XXX displays (where
XXX = dialed extension number)
YYY
ZZ displays (where XXX
= extension number, YYY = assigned
name, and ZZ = PSD bin number)
Next PSD bin number displays
Desired PSD bin number displays
81-
User MAINT displays
OR...
ON/OFF LED goes off
77
Advertisement
Table of Contents
