Table of Contents
Advertisement
Chapter 5. Key Telephone Features
Operation
To set the Timed Reminder Call feature:
1. Lift the handset or press the ON/OFF key.
2. Enter the Timed Reminder Set code (default = *31).
3. Enter the time you want the Timed Reminder Call to sound.
(Enter the time in 24-hour format. For example, 0100 for 1
AM, 1300 for 1 PM).
4. Replace the handset or press the ON/OFF key.
To cancel the Timed Reminder Call feature:
1. Lift the handset or press the ON/OFF key.
2. Enter the Timed Reminder Cancel code (default = *39).
3. Replace the handset or press the ON/OFF key.
Hardware Requirements
•
N/A
Related Programming
•
N/A
Considerations
•
An alarm tone (default = 16 seconds) will be issued at the specified time.
•
An extension can have only one Reminder Call set at a time.
•
To change the Reminder Call, simply enter a new time.
•
If the extension is in use when the reminder call is scheduled, the reminder call is issued 3
minutes later.
Trunk Access
CPC-96, CPC-288, and CPC-576 All Versions
Description
The System supports the following ways to seize an idle trunk to make an outside code:
•
CO Line Trunk Access
•
Direct Trunk Access
•
MCO Line Preference
190
Action
Action
DBS 576 (USA), Revised 6/11/98
Section 700 - Operation
Result
Intercom dial tone
Enter Alarm hhmm displays
Alarm HH:MM displays (where HH =
hour and MM = minutes)
Result
Intercom dial tone
Time display disappears
576-13-700
Advertisement
Table of Contents
